Sharp Washing Machine Error Codes and Solutions

Sharp Washing Machine Error Codes and Solutions

Washing machines make our lives easier, but sometimes they can run into problems. If you own a SHARP washing machine and see an error code on the display, don’t worry! These codes are there to help you understand what’s wrong. In this article, we’ll explain some common SHARP washing machine error codes and how you can fix them.

Common SHARP Washing Machine Error Codes

Here are some of the most common error codes you might see on your SHARP washing machine and what they mean:

1. Error Code E1

• Meaning: This code usually means there is a problem with the water supply. The machine is not filling with water.
• Solution:
  • Check if the water tap is turned on.
  • Make sure the water hose is not twisted or blocked.
  • Clean the water inlet filter if it’s dirty.

2. Error Code E2

• Meaning: This code indicates that the water is not draining properly.
• Solution:
  • Check if the drain hose is bent or clogged.
  • Clean the drain pump filter.
  • Ensure the drain hose is placed correctly.

3. Error Code E3

• Meaning: This code means the washing machine door is not closed properly.
• Solution:
  • Open and close the door firmly.
  • Check if there is anything blocking the door from closing.
  • Inspect the door lock for damage.

4. Error Code E4

• Meaning: This code shows there is too much foam in the machine.
• Solution:
  • Use less detergent in your next wash.
  • Run a rinse cycle to remove excess foam.

5. Error Code E5

• Meaning: This code means the water temperature is too low or too high.
• Solution:
  • Check if the hot and cold water supply is connected correctly.
  • Make sure the water heater is working properly.

6. Error Code E6

• Meaning: This code indicates a problem with the motor or motor circuit.
• Solution:
  • Turn off the machine and unplug it for a few minutes, then restart.
  • If the problem continues, contact a professional technician.

7. Error Code E7

• Meaning: This code means there is a problem with the washing machine’s sensor.
• Solution:
  • Restart the machine.
  • If the error persists, call a technician to check the sensor.

Tips to Prevent Errors

To keep your SHARP washing machine running smoothly, follow these tips:

• Use the Right Detergent: Always use the recommended amount of detergent.
• Clean Regularly: Clean the drum, filters, and hoses regularly to prevent blockages.
• Check Water Supply: Make sure the water tap is always turned on and the hoses are not damaged.
• Avoid Overloading: Do not put too many clothes in the machine at once.

When to Call a Professional

If you’ve tried the solutions above and the error code still appears, it’s time to call a professional technician. Some problems, like motor or sensor issues, require expert repair.

SHARP washing machine error codes are helpful tools to identify and fix problems. By understanding these codes and following the simple solutions, you can often solve the issue yourself. However, if the problem is too complicated, don’t hesitate to seek professional help. Taking good care of your washing machine will ensure it lasts longer and works efficiently.

Remember: A well-maintained washing machine means cleaner clothes and fewer worries